CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   on curved channel flow numerical results (http://www.cfd-online.com/Forums/main/3316-curved-channel-flow-numerical-results.html)

yfyap April 2, 2001 00:30

on curved channel flow numerical results
 
hi,

i am currently doing a simulation on curved channel flow (rectangular cross section). to verify my simulation results, i need to compare my simulation results with those of other investigators. but the problem is : where can i get numerical results of other investigators since in papers, only graphs are given ? any sources or suggestions are most appreciated. thanks.

yfyap

John C. Chien April 2, 2001 02:21

Re: on curved channel flow numerical results
 
(1). It's more than enough for me. (2). But you could try to get the related reports because the paper sometimes is the condensed version of the detailed report. You can find the report in the reference section of the paper. (3). You could also try to contact the authors, if they have not moved since the publication of the paper. These approaches are better, becuase there are always questions to ask.

andy April 2, 2001 06:00

Re: on curved channel flow numerical results
 
This a very common test case for turbulence models and has very likely been performed as part of a "benchmarking" exercise. If so, then the geometry, boundary conditions and results (if not a blind test) will have been distributed electronically. Try digging about the ERCOFTAC site for instance.

An alternative is simply to e-mail the authors and ask for the electronic results. Most are more than willing to see their results being used. However, be aware that some data will be owned by industrial sponsors and not the author's institution and so they may not be allowed to distribute it.

yfyap April 2, 2001 12:11

Re: on curved channel flow numerical results
 
dear John C and andy thanks. regards, yfyap

lyes43 February 8, 2011 05:44

hey
 
Quote:

Originally Posted by yfyap
;13855
hi,

i am currently doing a simulation on curved channel flow (rectangular cross section). to verify my simulation results, i need to compare my simulation results with those of other investigators. but the problem is : where can i get numerical results of other investigators since in papers, only graphs are given ? any sources or suggestions are most appreciated. thanks.

yfyap

hey i'm working on simulation of flow and heat transfer in a rectangular horizontal channel were I have heat sources mayu help me to simulate it i'm new in fluent
waiting ur answer thx lyes43@yahoo.com


All times are GMT -4. The time now is 00:47.