CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

So Nobody Out There Working on FSI Methods

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 8, 2001, 20:50
Default So Nobody Out There Working on FSI Methods
  #1
JD
Guest
 
Posts: n/a
Futher to my previous message - is there anybody working with FSI who can provide me with validation data. Prof/Dr/Mr Chien - Any Comment?

Regards

JD
  Reply With Quote

Old   April 8, 2001, 22:29
Default Re: So Nobody Out There Working on FSI Methods
  #2
John C. Chien
Guest
 
Posts: n/a
(1). There were two areas where fluid/structure interaction is important, one is the aero-elasticity and the other is the nuclear power plant. (2). So, you may want to do search in these two areas, check in the NASA/Langley Research Lab,I think, they must have something related to aero-elasticity problems. (3). You can also check into DOE related labs to see whether there are some CFD studies on the nuclear power plant fluid/structure interaction problems. (4). The other area is the bridge and building related aerodynamic problems. (5). You can also check into the Annual Review of Fluid Mechanics. There are many many volumes published, and I think, you should be able to find something about it.
  Reply With Quote

Old   April 9, 2001, 10:26
Default Re: So Nobody Out There Working on FSI Methods
  #3
Peter Attar
Guest
 
Posts: n/a
What type of data are you looking for? I work in the aeroelasticity field and specifically with the flutter/limit cycle oscillations of plate-like wing models. Would data of this type be of any use to you?
  Reply With Quote

Old   April 12, 2001, 08:21
Default Re: So Nobody Out There Working on FSI Methods
  #4
Gavin Butcher
Guest
 
Posts: n/a
Take a look at

http://www.software.aeat.com/cfx/Eur...m/bloodsim.htm

This is an EU sponsored project.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
DPM parallel is not working but serial is working johnwinter FLUENT 1 March 27, 2012 03:01
BCs in an FSI simulation of a flexble pipe vivekcfd OpenFOAM 10 January 8, 2010 05:14
fsi sun Siemens 8 January 20, 2009 00:17
how to extend FSI 2D codes to 3D, need advises abouziar Main CFD Forum 1 May 30, 2008 05:08
comments on FDM, FEM, FVM, SM, SEM, DSEM, BEM kenn Main CFD Forum 2 July 18, 2004 19:28


All times are GMT -4. The time now is 10:59.