CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

Suggest a post processor for visualisation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 13, 2001, 01:35
Default Suggest a post processor for visualisation
  #1
Mukhopadhyay
Guest
 
Posts: n/a
I think the title is sufficient - please add : vectors and contours (2D). Thanks in advance
  Reply With Quote

Old   June 13, 2001, 04:02
Default Re: Suggest a post processor for visualisation
  #2
Jing
Guest
 
Posts: n/a
I think Tecplot is a strong post-processor.
  Reply With Quote

Old   June 13, 2001, 04:46
Default Re: Suggest a post processor for visualisation
  #3
Kike
Guest
 
Posts: n/a
Hi, Mukhopadhyay

If you use Windows TECPLOT is Ok but it is not free.

Otherwise, try to use any Linux distribution and you will see the great performances of a free source codes such as: popiplot (http://www.lmm.jussieu.fr/MEMBERS/PO...lot/index.html

or Vis5D (at rpmfind.net I think). Good luck

Kike

  Reply With Quote

Old   June 13, 2001, 05:36
Default Re: Suggest a post processor for visualisation
  #4
Bart Prast
Guest
 
Posts: n/a
Use Fieldview
  Reply With Quote

Old   June 14, 2001, 14:54
Default Re: Suggest a post processor for visualisation
  #5
Dr Strangelove
Guest
 
Posts: n/a

There are a lot of possibilities, a few of which have already been mentioned by other responders to your query.

Two additional possibile alternatives you may wish to consider are these open source packages.
  1. vtk (see, too, MayaVi)
  2. dx
  Reply With Quote

Old   June 14, 2001, 19:24
Default Re: Suggest a post processor for visualisation
  #6
clifford bradford
Guest
 
Posts: n/a
Matlab is a good choice. You can probably find some cheap/free ones also at http://SAL.KachinaTech.COM/index.shtml
  Reply With Quote

Old   June 15, 2001, 06:33
Default THANKS!!!
  #7
Kike
Guest
 
Posts: n/a
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ansys Post processing ano999 ANSYS 1 May 27, 2011 16:24
NO model vs post processing in coal combustion,CFX sakalido CFX 1 April 15, 2011 14:07
Export from post gives different result between v11 and v12 bennn CFX 2 February 10, 2011 06:38
Proper output of angle of attack in CFX post Kevin CFX 3 October 18, 2006 12:18
Post Processing in FEM Abhijit Tilak Main CFD Forum 0 April 26, 2004 11:59


All times are GMT -4. The time now is 05:16.