CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Pipe flow with permeable walls

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 28, 2001, 17:23
Default Pipe flow with permeable walls
  #1
Malama, Bwalya
Guest
 
Posts: n/a
Is the pressure distribution across a given cross-section of a pipe with permeable walls through which a fluid flows uniform if there is also flow normal to the wall occurs? What packages could be used to compute such a distribution if it exists?
  Reply With Quote

Old   August 29, 2001, 10:46
Default Re: Pipe flow with permeable walls
  #2
Alton J. Reich
Guest
 
Posts: n/a
The latest release (v6.6) of out CFD-ACE+ package includes the ability to simulate flows through porous media. As long as you have enough information to define the porosity and permeability of the pipe, such an analysis can be performed.

Regards, Alton
  Reply With Quote

Old   August 29, 2001, 12:15
Default Re: Pipe flow with permeable walls
  #3
Kike
Guest
 
Posts: n/a
Dear Malama

Your first question seems to have not a trivial answer, at least for me, but the second one is very easy to answer (at least for me).

You can do it using PHOENICS. Depending on the complexity of your geometry you can even use it Shareware version. I think it is freely available for Universities or students. Nevertheless, check it at www.cham.co.uk. Good luck

Kike
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
High speed compressible flow through pipe Munni Main CFD Forum 6 December 7, 2015 12:33
setup problems - LES pipe flow with cyclic BC (1) and direct mapped inlet (2) florian_krause OpenFOAM 22 June 13, 2013 22:25
Pipe Flow Saima CFX 1 January 10, 2011 17:41
Turbulence intensity in fully devloped pipe flow - Reference Shocktrain Main CFD Forum 0 October 14, 2010 07:58
Turbulence in a pipe flow JM Main CFD Forum 4 December 21, 2006 05:04


All times are GMT -4. The time now is 02:30.