CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   beginning - Flow past a square cylinders (http://www.cfd-online.com/Forums/main/409-beginning-flow-past-square-cylinders.html)

Odenir de Almeida December 22, 1998 07:34

beginning - Flow past a square cylinders
 
I would like to change messages and informations about the numerical simulation of flow past around square cylinders. I am student of post-graduation of University of Ilha Solteira - UNESP - brazil - Department of Mechanical Enginnering, and I am beginning my research...

andy December 23, 1998 11:24

Re: beginning - Flow past a square cylinders
 
This was an ERCOFTAC test case from a few years ago where various research groups predicted the flow with a variety of codes and compared results. They were interesting for a variety of reasons. You may be able to get started at:

http://imhefwww.epfl.ch/ERCOFTAC/


Bo Jensen January 13, 1999 14:50

Re: beginning - Flow past a square cylinders
 
Hi!

I would like to help you if i can.

On my 7th semester project me and my fellow students made our own CFD-code for calculations of laminar flow past a square rod.

What kind of application is this for?

You could write me an e-mail: bbb@iet.auc.dk

Regards

Bo B. B. Jensen

Bernhard Mueck February 10, 1999 06:56

Re: beginning - Flow past a square cylinders
 
Try : @PhdThesis{soha98, author = "A. Sohankar", title = "Numerical {S}tudy of {L}aminar, {T}ransitional and {T}urbulent {F}low {P}ast {R}ectangular {C}ylinders", school = "Chalmers University of Technology, G{\"o}teborg", year = "1998", } It is also published in Physics of fluids 1/99 for the 3D case.

Good luck


Jonas Larsson February 10, 1999 09:38

Re: beginning - Flow past a square cylinders
 
You can also contact Ahmad directly at sohankar@tfd.chalmers.se

He is still doing this kind of work as a PostDoc.


All times are GMT -4. The time now is 15:42.