CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Flow simulation by ANSYS/FLOTRAN?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 18, 2001, 11:36
Default Flow simulation by ANSYS/FLOTRAN?
  #1
xin wang
Guest
 
Posts: n/a
Hi,everyone,

I am intending to simulate the flow-fields around a building. However, ANSYS is the only available CFD software to hand. I hope to get some information from those who have experience to use ANSYS/FLOTRAN to obtain such a flow-fields, any information is welcome.

In my case the flow is turbulent and there is separation generated at the edges of the building.

Thanking you in advance.

  Reply With Quote

Old   November 24, 2001, 08:58
Default Re: Flow simulation by ANSYS/FLOTRAN?
  #2
frank
Guest
 
Posts: n/a
Hi Xin,

turbolent flow with separation should work fine with FLOTRAN

Frank
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Domain format problem on airfoil flow simulation andrenonaka CFX 14 December 7, 2015 01:42
Channel flow setup in Large-eddy simulation Weihua Main CFD Forum 6 November 17, 2015 10:33
Is there any software for hypersonic flow simulation? atmcfd Main CFD Forum 3 November 29, 2010 00:28
Multiphase flow - simulation crashing yschati CFX 14 November 16, 2010 18:29
Expert parameter to stop the fluid flow simulation KK CFX 1 February 25, 2008 17:29


All times are GMT -4. The time now is 21:11.