CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

Momentum-Continuity Coefficients using SIMPLE

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 26, 2001, 03:53
Default Momentum-Continuity Coefficients using SIMPLE
  #1
Wassermayr
Guest
 
Posts: n/a
Dear All,

I've seen in some flow solvers using simple algorithm to couple pressure and velocity, that the coefficients for the continuity equation are the inverse pole coefficients of the momentum equation in the following way:

Momentum: MCOEFF(CELL)=sum(i=1,6)COEFF(neighbours)+Source

Continuity: CCOEFF(CELL)=2*MCOEFF(neighbour)*MCOEFF(CELL)/(MCOEFF(neighbour)+MCOEFF(cell))

I'd like to ask you, if this is correct (taking the source terms from Momentum equation into account for determining the coefficient for the Continuity equation).

best regards

wassi
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Simulation of Axial Fan Flow using A Momentum Source Subdomain Liam CFX 28 July 16, 2013 08:24
Orifice Plate with a fully developed flow - Problems with convergence jonmec OpenFOAM Running, Solving & CFD 3 July 28, 2011 05:24
Cumulative continuity error large in parallel simulations xiao OpenFOAM 3 March 7, 2011 05:13
calculation diverge after continue to run zhajingjing OpenFOAM 0 April 28, 2010 04:35
Velocity Under-relaxation in SIMPLE type methods Matt U. Main CFD Forum 6 July 4, 2005 05:29


All times are GMT -4. The time now is 02:09.