CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   conversion between CFD codes (http://www.cfd-online.com/Forums/main/4265-conversion-between-cfd-codes.html)

Roel January 7, 2002 08:31

conversion between CFD codes
 
Hi Everybody,

I would like to know if it is possible to convert Fluent case and data files directly to StarCD or CFX (and vice versa), including all boundary conditions and solver settings. Does anyone have experience with this?

I know that it is possible to convert the mesh through IGES/STEP tools and the solution through AVS/Fieldview formats. But this probably means that the grid-connectivity is lost, as well as the solver settings and boundary conditions.

Many thanks,

Roel Luppes

steve January 7, 2002 12:40

Re: conversion between CFD codes
 
You can convert the geometry and boundary locations to STAR with CGNS. There is not really a 1 to 1 correspondence of miscellaneous setup data (ie solver options, boundary properties, fluid properties...) so this data would have to be reentered.


All times are GMT -4. The time now is 17:09.