|
[Sponsors] |
January 29, 2002, 11:45 |
sponge layer-boundary condition.
|
#1 |
Guest
Posts: n/a
|
Hi, Recently i went through a paper and found that at pressure outlet of the domain sponge layer is used.
what is this sponge layer. how it will be implemented in a code as a boundary condition. i will be very thankfull for your help. bye rajani |
|
January 30, 2002, 05:57 |
Re: sponge layer-boundary condition.
|
#2 |
Guest
Posts: n/a
|
Dear Akula
Could you give the reference, please? Thanks Regards Kike |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
mixed inflow/outflow downstream boundary condition question | peob | OpenFOAM Running, Solving & CFD | 3 | February 3, 2017 11:54 |
[snappyHexMesh] Boundary layer in a pipe | Clementhuon | OpenFOAM Meshing & Mesh Conversion | 6 | March 12, 2012 13:41 |
External Radiation Boundary Condition (Two sided wall), Grid Interface | CFD XUE | FLUENT | 0 | July 8, 2010 07:49 |
how to set up a wall boundary condition according to calculated wall shear stress? | gameoverli | OpenFOAM Pre-Processing | 1 | May 21, 2009 09:28 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 05:15 |