|
[Sponsors] |
April 5, 2002, 22:54 |
Mesh refinement
|
#1 |
Guest
Posts: n/a
|
how begin the work of mesh refinement?i should read which books or papers?thanks.hanjun77@eyou.com
|
|
April 6, 2002, 11:16 |
Re: Mesh refinement
|
#2 |
Guest
Posts: n/a
|
That depends largely on what type of flow solver you're using. Mesh adaptation is a broad subject with many approaches.
If you have a structured grid, look for papers in mesh movement or local embedding techniques. If you have an unstructured solver, there are many papers dealing with cell/edge splitting methods, Delaunay refinement, and even advancing front methods for local mesh enrichment. The first question is what type of mesh are you looking to refine? |
|
April 26, 2002, 02:21 |
Re: Mesh refinement
|
#3 |
Guest
Posts: n/a
|
I use a structured grid,but i don't know how to find the paper in mesh movement or local embedding techniques,can you help me?thank you very much.my email is hanjun77@eyou.com.
|
|
May 3, 2002, 08:25 |
Re: Mesh refinement
|
#4 |
Guest
Posts: n/a
|
I admit my experience is predominantly in unstructured methods so my awareness of structured grid adaptation techniques is rudimentary at best.
Local embedding methods will require additional upgrades to your flow solver to handle the many-to-one interfaces of the refined cells to neighboring original cells. Movement is probably a good first step. One must take care to ensure the Jacobians of the mesh remain valid and grid lines do not cross. Try to find papers by D.S.McRae, his group makes use of mesh movement methods. Anyone else have other references to add? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] surface mesh merging problem | everest | ANSYS Meshing & Geometry | 44 | April 14, 2016 06:41 |
[ICEM] How to generate sunstructured "all-tri patch-dependant" surface mesh in ICEM? | jash | ANSYS Meshing & Geometry | 19 | July 23, 2013 18:48 |
Converting Starccm+ mesh | Ladnam | OpenFOAM | 0 | September 14, 2011 06:30 |
Meshing aifoil in ICEM | student123a | ANSYS Meshing & Geometry | 13 | December 8, 2010 10:40 |
basic of mesh refinement | arya | CFX | 4 | June 19, 2007 12:21 |