CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

singularity in axis-symmetric probelm

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 20, 2002, 06:09
Default singularity in axis-symmetric probelm
  #1
x.zhang
Guest
 
Posts: n/a
Does anyone know how to treat the singularity due to (1/r) in an axis-symmetric problem?

In stream-function vorticity method for 2D axis-symmetric problem:

Ur=(1/r)ds/dz Uz=-(1/r)ds/dr

when r->0 both->infinite. If the mesh size becomes small, it is very hard to get a solution unless you use very very small timestep.

Thanks a lot.
  Reply With Quote

Old   June 20, 2002, 14:31
Default Re: singularity in axis-symmetric probelm
  #2
Jim Park
Guest
 
Posts: n/a
Unless I'm overlooking something (always a possibility), the radial velocity (Ur) has to be zero at r = 0 unless a mass source or sink exists at r = 0.

Also, at r = 0 d(Uz)/dr = 0; the Uz velocity must be symmetric about r = 0. This also says that the stream function is a constant (a streamline!) at r = 0.

These two can be combined to give a boundary condition for the vorticity at r = 0.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
axis symmetric + swirl bthomas OpenFOAM Running, Solving & CFD 0 April 12, 2011 19:48
IcoFoam parallel woes msrinath80 OpenFOAM Running, Solving & CFD 9 July 22, 2007 03:58
axis singularity for cylindrical coordinates daniel Main CFD Forum 0 May 9, 2006 18:45
Could anybody help me see this error and give help liugx212 OpenFOAM Running, Solving & CFD 3 January 4, 2006 19:07
Singularity on the axis Daniel Main CFD Forum 1 June 9, 2005 01:14


All times are GMT -4. The time now is 23:22.