CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   y+, Dx+,Dz+ for LES (http://www.cfd-online.com/Forums/main/4866-y-dx-dz-les.html)

Li Yang June 24, 2002 17:04

y+, Dx+,Dz+ for LES
 
Dear all,

Could you please tell me what are the restrictions of y+, Dx+ and Dz+ for LES ? Do those restrictions refer to the maximum values or averaged values ?

Thank you very much in advance !

Li


Alexandre Chatelain July 29, 2002 09:14

Re: y+, Dx+,Dz+ for LES
 
For LES, the recommended values for the grid spacing are (in the case where no wall wall is used) :

Medium resolution : Dy+min = 1 Dx+ ~ 70-80 Dz+ ~ 15-20

High resolution : Dx+ ~ 35 Dz+ < 10

Low resolution : Dx+ ~ 155 Dz+ ~ 35-40

Of course these "should" be averaged values...

Alexandre Chatelain

PhD Student - LES of Heat Transfer CEA Grenoble - LEGI/MoST Team FRANCE


Li Yang August 10, 2002 18:21

Re: y+, Dx+,Dz+ for LES
 
Dear Alexandre,

Thank you for your reply. Do you have any reference for those criterions ?

With best wishes

Li


All times are GMT -4. The time now is 19:46.