CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Corner Vortex for Backward Facing Step

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 6, 2002, 10:34
Default Corner Vortex for Backward Facing Step
  #1
Patrick G. Hu
Guest
 
Posts: n/a
Recently I performed the numerical calculation for backward facing step using k-omega model of Wilcox's low Reynolds number version in 1998 (This case is standard case for validating the code, and has a experimental data for comparison. See the Journal paper: AIAA Journal Vol.23, No.2, David M. Driver and H. Lee Seegmiller, "Features of Reattaching Turbulent Shear Layer in Divergent Channel Flow"). I used 121x121 grid points and the domain is 45x9 (using the height of the step as the length scale). I do captured the corner eddy which is confined within about 1 dimension of the step hight. But some papers claimed that calculation did not capture this corner eddy before. I would like to know if recently anybody captured this corner eddy too if using Turbulence Modeling like k-e and k-omega model. Why calculation is difficult to capture this corner eddy. In the experiment, Driver at al. saw the existance of this coner eddy confined within 2 times of the step hight. I very appreciate if anybody can share your idea with me.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Transient simulation not converging skabilan OpenFOAM Running, Solving & CFD 14 December 17, 2019 00:12
How to write k and epsilon before the abnormal end xiuying OpenFOAM Running, Solving & CFD 8 August 27, 2013 16:33
Upgraded from Karmic Koala 9.10 to Lucid Lynx10.04.3 bookie56 OpenFOAM Installation 8 August 13, 2011 05:03
IcoFoam parallel woes msrinath80 OpenFOAM Running, Solving & CFD 9 July 22, 2007 03:58
Could anybody help me see this error and give help liugx212 OpenFOAM Running, Solving & CFD 3 January 4, 2006 19:07


All times are GMT -4. The time now is 01:23.