nasa rotor 67 or 37 geometry
dear all I need the geomtry of nasa rotor 67 or 37 test case for validation of code. i would be thankful to you
|
Re: nasa rotor 67 or 37 geometry
What code are you testing? Have you got results of experiment testing of rotor 67 and 37?
|
Re: nasa rotor 67 or 37 geometry
Dear Ivan
I am using Fluent 6.2. and I dont have experimental results of nasa rotor 67 etc. I would be grateful if any body can help me regards sam |
Re: nasa rotor 67 or 37 geometry
If you fined - write me, please: ivanklok@mail.ru
|
Re: nasa rotor 67 or 37 geometry
sure
|
Re: nasa rotor 67 or 37 geometry
Hi:
You can find geometry of Nasa Rotor 37 and experimental results at NASA-TP-1659 NASA-TP-1337 NASA-TP-1338 AGARD-AR-355 (http://ftp.rta.nato.int/public//PubF...AGARDAR355.pdf) Can you tell me , which software you are using to generate blade geometry, actually i have blade parameters but don't know how to use these parameters to generate blade geometry. Thanks |
Re: nasa rotor 67 or 37 geometry
I am using Gambit/G Turbo
can you send me that file on my email address. |
Re: nasa rotor 67 or 37 geometry
yes: send me your email
|
Re: nasa rotor 67 or 37 geometry
|
Re: nasa rotor 67 or 37 geometry
where do u live? I will send within couple of days.
|
Re: nasa rotor 67 or 37 geometry
I want the axial compressor blade geometry (naca 67 rotor) .so thanks
|
Re: nasa rotor 67 or 37 geometry
You can get geometry for Rotor 67 here:
http://ntrs.nasa.gov/archive/nasa/ca...1990001929.pdf The table starts on page 18. Does anyone have any geometric data for stators tested with Rotor 67 (or 37)? I'd be grateful if anyone who does can post up the links. :) |
Re: nasa rotor 67 or 37 geometry
Also, Rotor 67 and Stator 67A geometry available here:
NASA Technical Memorandum 88929 Unsteady Flows in a Single-Stage Transonic Axial-Flow Fan Stator Row Michael D. Hathaway See pages 182 to 188. http://ntrs.nasa.gov/archive/nasa/ca...1987007372.pdf |
NASA 67 STAGE GEOMETRY COMPATIBLE
Does anyone have the goemtry of NASA stage 67 already in any alectronic format? IGES format would be very useful. Although any format compatible with Fluent/Gambit woul be good as well.
|
Re: nasa rotor 67 or 37 geometry
how to use this data to model rotor in ProE or any other 3D cad software or in AutoBlade of NUMECA?
Thanks. |
Re: nasa rotor 67 or 37 geometry
please send for me geometry of nasa rotor 67 or 37
|
Re: nasa rotor 67 or 37 geometry
please send me the geometry of NASA rotor 67
|
Re: nasa rotor 67 or 37 geometry
It will be great if you could send me the NASA Rotor 67 geometry and blade profiles.
thanks |
Re: nasa 37 geometry
Please send me NASA rotor 37 profile...
|
NASA stage 35
Dear all, anyone have the model of NASA stage 35 or any reference paper on that , kindly hope that u can share with me about that
|
All times are GMT -4. The time now is 22:24. |