CFD Online URL
[Sponsors]
Home > Forums > Main CFD Forum

Visualization Area

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 5, 2002, 13:19
Default Visualization Area
  #1
Bharath
Guest
 
Posts: n/a
Hello there

I have been working on Spray modelling and It is required to obtain a Uniformly Distributed Fine Spray at the Exit of the nozzle.To achieve this..I tried to extend my nozzle exit by constructing an Visualisation area of order 100mm*60 mm ( and gave pressure outlet conditions at the edes )while my nozzle dimensions are of the order 1-5 mm....do u think such a big Visualization area is required to see the flow at the exit ?..would it have any impact on the Convergence of the program and hence the modelling ??

Thanks

Bharath
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Problem with reference area alfaben STAR-CCM+ 2 September 17, 2011 04:46
Non overlap area fractions saisanthoshm88 CFX 9 April 26, 2011 14:05
CFX Solver Memory Error mike CFX 1 March 19, 2008 09:22
Visualization Area Bharath FLUENT 0 December 5, 2002 13:20


All times are GMT -4. The time now is 05:32.