CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

simulation of taylor bubble

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 18, 2002, 05:34
Default simulation of taylor bubble
  #1
merrouche djemai
Guest
 
Posts: n/a
Hi, I'm traying to simulate the motion of a single taylor bubble rising in stagnant liquid in vertical tube with code SURFER 2D. in applying the boundary conditions, like this: 1)velocity gradients equals zero at the inlet and the outlet; 2)symmetry in the center; 3) no-slip condition at the wall. I find that the code is not very stable and I can't obtain the forme of the bubble. If one can help me how to implement the various boundary conditions in the SURFER code and also if there is any help to do this work. thanks.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Why my simulation not agree with the wind tunnel experiment zhaowei CFX 4 July 11, 2015 04:36
Solar Radiation in OpenFOAM plainstyle OpenFOAM Running, Solving & CFD 15 July 8, 2014 05:43
Simulation of a complex wing in solidworks flow simulation niels1900 FloEFD, FloWorks & FloTHERM 6 April 20, 2011 11:44
Continuous vs interrupted simulation sega OpenFOAM Running, Solving & CFD 4 November 3, 2008 15:29
strange simulation error Ralf Schmidt FLUENT 2 May 4, 2007 14:02


All times are GMT -4. The time now is 09:08.