CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   For turbulent boundary layer (http://www.cfd-online.com/Forums/main/5601-turbulent-boundary-layer.html)

Orion January 2, 2003 15:43

For turbulent boundary layer
 
Since a even order central differential scheme has a huge numerical dissipation to the calculation of turbulence boundary layer, it is very difficult to hold the U_tau and turbulent statistical qualities. Structures are decay very fast in my LES simulations, dynamic modeling + LUSGS scheme used on that.

My question is that,

Does anyone encounter it before? Do you have some suggestions to the numerical dissipation?


Linfeng BI January 2, 2003 23:45

Re: For turbulent boundary layer
 
As far as I know, 2nd order central difference scheme can work fairly well in LES if the desired order of the statistical quantities is not too high ( say 2nd order).

Maybe your mesh is not fine enough, or try employing a wall model in your simulation.

regards


All times are GMT -4. The time now is 23:53.