CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   CFD Applications in Environmental Engineering (http://www.cfd-online.com/Forums/main/574-cfd-applications-environmental-engineering.html)

Andy February 22, 1999 21:05

CFD Applications in Environmental Engineering
 
Yemi's question about CFD in petroleum engineering inspired me to ask the following (maybe related?) question: Is CFD used in ENVIRONMENTAL engineering? If so, what are the applications?

Thanks! Andy

Rashid Faizullin February 24, 1999 07:59

Re: CFD Applications in Environmental Engineering
 
Hell Andy, you can see description plus demo version on cmm.univer.omsk.su/kbks

(on the Russian)

There are hydraulics application for large town Omsk-1200 000 peoples- heat water transfer problem near 10 000 pipes. There are not only programm but theorems and new CFD approach for solution.

Regards

Eric Grald March 5, 1999 15:34

Re: CFD Applications in Environmental Engineering
 
Dear Andy,

CFD has been widely used in these environmental engineering applications (among others): Chemical tracer analysis, Reservoir baffle location and pump station design, Water treatment, wastewater reactions, Groundwater flow, contamination, underground spills, flows in aquifers and mineral deposits, Vitrification of contaminated soil, Ozone contactors, Combustion, Flows in and around buildings, Flows rivers and ponds.

I hope this gives you an idea of the breadth of applications.

Eric Grald, Fluent Inc.


ziyou March 29, 1999 01:25

Re: CFD Applications in Environmental Engineering
 
I would to find out what is the impulse caused when a raindrop hits the ground?


All times are GMT -4. The time now is 05:40.