CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

reflcetive BC at free end of 3D tube(tunnel)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 17, 2003, 12:36
Default reflcetive BC at free end of 3D tube(tunnel)
  #1
kei-tee
Guest
 
Posts: n/a
Hi everyone! I'd like to know appropriate reflective(on compression or expansion wave) B.C. at free end of tube model. Is pressure fix (to static pressure) at free end best chice?
  Reply With Quote

Old   February 18, 2003, 12:36
Default Re: reflcetive BC at free end of 3D tube(tunnel)
  #2
kei-tee
Guest
 
Posts: n/a
more detail description:

Solver: 3D compressible Euler eq. (FDM, Roe FDS) tube is lie horizontal in the air. Both end is open.

Now,I adopt following BC, P at both end is set to static pressure.

Is this BC is apropriate? I'm not sure.

Give me a suggestion please.

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 58 July 3, 2020 02:13
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Constant velocity of the material Sas CFX 15 July 13, 2010 09:56
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05


All times are GMT -4. The time now is 21:22.