CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

ICEM CFD - Multiblock mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 3, 2003, 13:27
Default ICEM CFD - Multiblock mesh
  #1
centaur_ks
Guest
 
Posts: n/a
does anyone know how to marge blocks in ICEM CFD ? I generated my multiblock structured mesh and when i imported it into my solver i see each blocks seperately in my region manager.

I have 3 regions in my assembly so i have 3 different material zones. what i want to do is, marge all the blocks of each materials into one block so that in my solver i just see one block for each volume i.e material.

thanks in advance
  Reply With Quote

Old   March 4, 2003, 13:21
Default Re: ICEM CFD - Multiblock mesh
  #2
Martin Nilsson
Guest
 
Posts: n/a
What you need to do is to give all three blocks the same material. This is different from blocking. Blocking only deals with the topology and has little to do with what material is defined for each block.

Look under the material menu and set the material for all three blocks the same. That should do the trick. I usually name it FLUID or LIVE, these names are recognized by Fluent and CFX. What solver are you running btw?

Merging block for topology reasons is different and done under the topo or blocking menu I think, i don't have ICEM open right now.

Martin
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 06:20
ICEM 12 CFD help creating volume mesh from stl EmpError ANSYS 0 November 13, 2010 06:38
ICEM CFD to CFX geometry and mesh Luca CFX 6 February 4, 2010 16:31
How to corse mesh in icem cfd? Priety CFX 2 October 2, 2006 03:57
ICEM CFD 5.1 Hex-Tet mesh merging failure bogesz CFX 1 January 29, 2005 06:46


All times are GMT -4. The time now is 05:38.