CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

FVM for non-orthogonal meshes?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 1, 2003, 06:51
Default FVM for non-orthogonal meshes?
  #1
Barry
Guest
 
Posts: n/a
I'm looking for books / papers / references dealing specifically with the Finite Volume Method applied to unstructured non-orthogonal (skew) meshes.

Co-located or staggered.

Thanx for any help. Barry
  Reply With Quote

Old   April 3, 2003, 16:18
Default Re: FVM for non-orthogonal meshes?
  #2
Dr. Hrvoje Jasak
Guest
 
Posts: n/a
Try my Thesis.

http://www.h.jasak.dial.pipex.com/publications.html, ref 16.
  Reply With Quote

Old   April 6, 2003, 23:24
Default Re: FVM for non-orthogonal meshes?
  #3
frederic felten
Guest
 
Posts: n/a
hi there,

check the work of Blair Perot: http://www.ecs.umass.edu/mie/faculty/perot/index.html

You will be able to find a lot of articles about FVM and conservation issues associated with this approach when unstructured meshes are used.

Hope this helps,

Sincerely,

Frederic Felten.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Getting prism to inflate into mixed tet-hex meshes Joe CFX 16 October 10, 2011 07:06
comments on FDM, FEM, FVM, SM, SEM, DSEM, BEM kenn Main CFD Forum 2 July 18, 2004 18:28
Merging Meshes Matteo Giacobello. FLUENT 1 February 16, 2000 09:22
Large 3D tetrahedral meshes Aldo Bonfiglioli Main CFD Forum 4 August 27, 1999 03:33
Orthogonal curvilinear coordinates Rudolf Pfeiffer Main CFD Forum 6 December 10, 1998 10:20


All times are GMT -4. The time now is 22:35.