|
[Sponsors] |
March 7, 1999, 03:13 |
Boundary conditinos in PHOENICS
|
#1 |
Guest
Posts: n/a
|
I am doing a simulation on turbine blade heat transfer using PHOENICS. could any one tell me how to write these boundary conditions using PHOENICS Input Language (PIL) commands group (13)
The boundary conditions are: - Inlet: - Total temperature(K): 409.2 Total inlet pressure (bar):0.822 Mach number: 0.15 Reynolds number 1.2048E+5 Temperature (K) 407.37 Pressure (bar) 0.809 Density (kg/m**3) 0.692 Velocity (m/s) 60.70 Dynamic viscosity(kg/m.s) 2.3581E-05 Kinematic viscosity (m2/s) 3.4079E-05 Outlet: - Mach number: 1.135 Reynolds number: 5.4770E+5 Temperature (K): 325.37 Pressure (bar): 0.369 Density (kg/m**3): 0.395 Velocity (m/s): 410.45 Dynamic viscosity (kg/m.s): 2.000E-05 Kinematic viscosity (m2/s): 5.0696E-05 Wall temperature (k): 301.95 Free stream turbulence 6.0 % Thank you in advanca |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wind turbine simulation | Saturn | CFX | 58 | July 3, 2020 01:13 |
Implementation of boundary conditions for FVM | Tom | Main CFD Forum | 7 | August 26, 2014 05:58 |
inlet velocity boundary condition | murali | CFX | 5 | August 3, 2012 08:56 |
Boundary conditions? | Tom | Main CFD Forum | 0 | November 5, 2002 01:54 |
Boundary Conditions | Jan Ramboer | Main CFD Forum | 11 | August 16, 1999 08:59 |