CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   Use of an hydrodynamic model integrated in the vertical by the PHOENICS code (http://www.cfd-online.com/Forums/main/634-use-hydrodynamic-model-integrated-vertical-phoenics-code.html)

Hafsia Zouhaier March 13, 1999 12:39

Use of an hydrodynamic model integrated in the vertical by the PHOENICS code
 
These questions concern the application of an hydrodynamic model integrated in the vertical by the PHOENICS code and are listed below : 1) The bottom shear stress, and shear stress generated by the wind are they preprogrammed in the PHOENICS code; then, what are the calls procedures to these terms ? 2) How to take into account variable distribution of rugosity and diffusion coefficient in the PHOENICS code ? 3) The hydrostatic distribution of pressure can it be verified by the PHOENICS code ? 4) Can one solve the 1-D Saint-Venant equations by the PHOENICS code ? 5) How can one work in term of adimentional variables in the PHOENICS code ? 6) Could you send me Q1 files relative to questions posed ? 7) What is the formulation of the full equation solved in terms of covariant compenent when an hydrodymic model integrated in the vertical was used ?

Please, tell me who can give me the corresponding replies to these questions.

Adress : Hafsia Zouhair

Ecole Nationale d'Ingénieurs de Tunis.

Laboratoire d'Hydraulique.

B.P. 37 - Le Belvédère, 1002, Tunis, Tunisie.

Tel. : (216 1) 874 700 (475) - Fax. (216 1) 872 729

Thank you for your help

Abdul Hafid Elfaghi March 14, 1999 00:18

Re: Use of an hydrodynamic model integrated in the vertical by the PHOENICS code
 
Dear Hafsia, why dont you take the answers from user support of PHOENICS by sending your e-mail directly to CHAM. this is their address:

User Support Service

CHAM, Bakery House, 40 High Street,

Wimbledon Village, London SW19 5AU, UK.

Tel: +44 (181) 947 7651

Fax: +44 (181) 879 3497

24 hour answerphone: +44 (181) 879 6872

e-mail: support@cham.co.uk

with best regards

Hafid

Hafsia Zouhaier March 15, 1999 09:23

Re: Use of an hydrodynamic model integrated in the vertical by the PHOENICS code
 
Dear Hafid,

Thank you for your suggestion about how I can get answers of the questions concerning the use of an hydrodynamic model integrated in the vertical by the PHOENICS code.

I would to inform you that these questions was firstly adressed to the user Support/ "Discussion Group", but I have not any answers. That's why I have adressed these questions to the Online-CFD Discussion

My best regards.


All times are GMT -4. The time now is 16:04.