CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   help, error spray simulation in contant volume chamber with kiva (http://www.cfd-online.com/Forums/main/65206-help-error-spray-simulation-contant-volume-chamber-kiva.html)

toto June 8, 2009 09:52

help, error spray simulation in contant volume chamber with kiva
 
I focus on spray simulation in contant volume chamber with kiva.
I choose the sector mesh for simulation.
The error message is as following.
error: sector=1.0 but cannot find a periodic boundary

however,i already set up the periodic boundary for the front and derriere face.

the following is my iprep.
------------------------------------------------------------------
bore 10.000
stroke 0.00
squish 8.00
thsect 72.0
nblocks 1
1 20 10 30 0 2 1 0
5.000 5.000 0.000 0.000 5.000 5.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.0 0.0 0.0 0.0 8.000 8.000 8.000 8.000
3.0 2.0 5.0 6.0 2.0 2.0
-1.0 -1.0 -1.0 -1.0 -1.0 -1.0
ncopy 0
tiltflag 0
pentflag 0
wedgeflag 0
translate 0
nlocxy 0
reshape 0
npentxy 0
nvguide 0
nvalvport 0
nrunner 0
nsiamese 0
nround 0
nrelaxb 0
nprovtop 0
nprovfce 0
nzcylwall 0
tilt 0
ndish 0
nscallop 0
xoffset 0.0
yoffset 0.0
write17 1.0
plotmesh 1.0
xband 0.0
yband 0.0
zband 0.0
nxplots 0
nyplots 1
0.0
nzplots 0
nvhide 0
-------------------------------------------------------------
Any help or suggestion will be appreciated.


All times are GMT -4. The time now is 07:58.