CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

hydrostatic balance

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 26, 2003, 16:51
Default hydrostatic balance
  #1
Nashat
Guest
 
Posts: n/a
Hi,

I have the following problem:

On a 2D unstructured triangular mesh, I need to impose hydrostatic balance in the y-direction. The problem boils down to: given a field (density) specified at cell-centers, impose pressure at cell centers such that dp/dx = 0 and dp/dy = -rho*gravity at cell centers.

Any ideas/suggestions or pointer to relevant publications would be greatly appreciated.

Regards.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
volumetric reaction and energy balance? m.beh FLUENT 1 October 17, 2011 17:21
Population Balance Theory student Main CFD Forum 2 August 10, 2008 04:12
HELP needed: Energy balance in gaseous combustion James Willie FLUENT 11 August 10, 2005 04:58
Hydrostatic pressure in 2-phase flow modeling (CFX4.2) HB &DS CFX 0 January 9, 2000 14:19
Hydrostatic pressure in 2-phase flow modeling (long) DS & HB Main CFD Forum 0 January 8, 2000 16:00


All times are GMT -4. The time now is 21:55.