CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Using Gambit to mesh Nasa rotor 35

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 26, 2009, 05:04
Smile Using Gambit to mesh Nasa rotor 35
  #1
Member
 
Join Date: Jul 2009
Posts: 43
Rep Power: 16
nana is on a distinguished road
dear all:

I have the control volume of nasa rotor 35, and i am using gambit to mesh it. However, i tried so many ways to solve the high skewness angle appear at the edge of the blade, i still cannot find the best way to solve it.My blade have twist angle from the root to tip. Anyone who can help me out with the good suggestion? Really appreciate on that.

I also can upload the geometry if u want to have a look, thanks
nana is offline   Reply With Quote

Old   October 19, 2009, 00:20
Default
  #2
Senior Member
 
Eric Nutsch
Join Date: Sep 2009
Location: Eugene, Oregon USA
Posts: 113
Rep Power: 16
ericnutsch is on a distinguished road
Send a message via Skype™ to ericnutsch
Unstructured mesh?
Are you using a size function?

The easy solution is just to increase the resolution of your mesh. If your computer can handle it, it is an very effective solution.

If thats not an option your should attach a print screen of the skewed members and we can take a look at the geometry.

Good luck
ericnutsch is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to set boundary layer of a moving body in GAMBIT to a mesh zone for dynamic mesh tomyangbath FLUENT 18 October 12, 2016 07:57
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 19:10
How to mesh a circle by Gambit? Zhengcai Ye FLUENT 5 March 24, 2006 02:04
[Commercial meshers] Mesh import from gambit Kaushik Balakrishnan (Balakrishnan) OpenFOAM Meshing & Mesh Conversion 5 April 21, 2005 14:42
How to control Minximum mesh space? hung FLUENT 7 April 18, 2005 10:38


All times are GMT -4. The time now is 09:35.