CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

urgent in help

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 1, 2003, 16:58
Default urgent in help
  #1
chinthakindi
Guest
 
Posts: n/a
Hello CFD friends,

I am working on DNS of diffusion flames. flame is emmiting from round shape nozzle. so i can call it as round jet. for this jet ,there is an experimental data, and i want to run my simulation and compare with this experimental results, here my problem is the experiment has been carried out at Reynolds number of 16000, i want to simulate this flame,, so i have to set Reynolds number ,,how i have to set Reynolds number in my simulation,,i mean i have to give as it is 16000 or i have to calculate based on some other methods,,in the literature , i have seen , most of the flames are doing simulation based on orifice diameter ,,what is this,, i didnt understand this,, please help me ,,

  Reply With Quote

Old   December 8, 2003, 06:27
Default Re: urgent in help
  #2
Zhou Hua
Guest
 
Posts: n/a
Hi, chinthakindi,

Reynolds number can be set directly in dimentionless N-S equations, if you are using a dimentional N-S, you can check how the Reynolds number is set in your program. Usually, people calculate the Reynolds number using characteristic length, density, velocity, and viscosity, and the length usually is the diameter of the nozzle, the density and viscosity can be determined with the flow conditions, the only parameter you can set is only velocity, so just using 16000 to obtain the velocity, you can get your result!

Good Luck!

Zhou Hua
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Urgent - Polyflow - particle tracking visualization -Urgent shafaatht ANSYS 0 October 13, 2010 04:56
Urgent, Urgent, a UDF problem, PLEASE HELP!!! Max FLUENT 1 September 24, 2010 20:30
Urgent...urgent...plss!!! astronome FLUENT 0 October 16, 2009 07:17
tmerge urgent urgent jessica FLUENT 4 July 15, 2006 13:37
very urgent pleasade:Cl and Cd values for airfoil Liaquat FLUENT 2 April 27, 2006 12:20


All times are GMT -4. The time now is 02:38.