CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

About compressible flow at low mach

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 26, 2009, 09:31
Red face About compressible flow at low mach
  #1
hit
New Member
 
WANG
Join Date: Oct 2009
Posts: 1
Rep Power: 0
hit is on a distinguished road
Dear CFD friends,

now,I have a question about calculation of compressible flow at low mach,But I can not get a good result.I can not find reasons. Calculation condition as follows:
[1]stream flow Mach number M=0.01
[2]Rey=6e4
[3]space: MUSCL method
Roe average method
[4]time: LUSGS method
[5]Laminar flow method(Compressible flow Code is used)

By these conditions,for example,If Roe-average method is used at very low Mach number(Mach number M=0.01) by Compressible flow Code,Can I get good result?
Thanks
hit is offline   Reply With Quote

Old   October 26, 2009, 11:19
Default
  #2
Super Moderator
 
Praveen. C
Join Date: Mar 2009
Location: Bangalore
Posts: 342
Blog Entries: 6
Rep Power: 18
praveen is on a distinguished road
You will get very bad results at such low mach numbers with a compressible code. You need to use some preconditioner. A easy preconditioner for roe scheme can be found in

Herve and Viozat
http://citeseerx.ist.psu.edu/viewdoc...10.1.1.35.2610
praveen is offline   Reply With Quote

Old   October 26, 2009, 22:21
Default
  #3
New Member
 
Rudhi Kurniawan
Join Date: Oct 2009
Posts: 1
Rep Power: 0
Kurniawan is on a distinguished road
Hi, im mechanical engineering student and i make an unsteady compressible navier-stokes simulation at low speed, using C++, mccormack scheme.

when i place an obstacle, i got good result, with 1500 iteration i can see that the flow is convergence and it has vortex flow on it. Beautiful ...

The problem is interaction between fluid flow and boundary is very weak, what should i do to fix it??? It is channel flow with u = 3 m/s, channel length 10 cm, height 10 cm.

can somebody help me???
Kurniawan is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
urgent help needed with 2d compressible flow James FLUENT 2 June 20, 2007 05:22
low speed compressible two phase flow?? cat CFX 0 November 15, 2005 08:59
Compressible code at low Mach numbers Peter Main CFD Forum 7 May 15, 2003 08:12
Low Reynolds, compressible flow andre burdet Main CFD Forum 0 February 21, 2001 12:13
compressible channel flow.. R.D.Prabhu Main CFD Forum 0 July 17, 1998 18:23


All times are GMT -4. The time now is 07:35.