CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

implement of Spalart-Allmaras model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 29, 2004, 00:52
Default implement of Spalart-Allmaras model
  #1
K S Chang
Guest
 
Posts: n/a
I have implemented the S-A model in the code. In the case of boundary layer flow, the results of validation is good and same with other simulation results.

However, in the existence of edge (ex. backstep , cavity) in geomerty, the convergence of results is not good and so slow or blow up.

In my thought, the positiveness of production term is not satisfied.

Perhaps, do you konw the skills or tricks to improve the convergence of S-A model. Or some methods to stabilize the code ??

Thank you in advance.
  Reply With Quote

Old   August 21, 2010, 17:59
Default
  #2
Senior Member
 
morteza08's Avatar
 
Morteza
Join Date: May 2010
Location: Iran,Islamic Republic of
Posts: 161
Rep Power: 15
morteza08 is on a distinguished road
Quote:
Originally Posted by K S Chang
;27487
I have implemented the S-A model in the code. In the case of boundary layer flow, the results of validation is good and same with other simulation results.

However, in the existence of edge (ex. backstep , cavity) in geomerty, the convergence of results is not good and so slow or blow up.

In my thought, the positiveness of production term is not satisfied.

Perhaps, do you konw the skills or tricks to improve the convergence of S-A model. Or some methods to stabilize the code ??

Thank you in advance.
hi dear...
i am strongly in need with a spalart allmaras code..
can i have your code ????
thanks
morteza08 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
fv3 term in Spalart Allmaras model bfa OpenFOAM Programming & Development 1 July 16, 2013 14:02
Negative reynolds stresses from Spalart Allmaras model velezisaza OpenFOAM 0 October 15, 2010 06:49
Implement new Turbulence Model sven OpenFOAM 0 July 19, 2009 16:47
Question to the new Version of Spalart Allmaras in 13 andimb OpenFOAM Running, Solving & CFD 0 April 7, 2006 12:31
Advanced Turbulence Modeling in Fluent, Realizable k-epsilon Model Jonas Larsson FLUENT 5 March 13, 2000 04:27


All times are GMT -4. The time now is 07:41.