CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Pressure&Veloctiy Iteration in SOLA method

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 2, 2007, 13:48
Default Pressure&Veloctiy Iteration in SOLA method
  #1
Lang Yuan
Guest
 
Posts: n/a
Hi, I try to use SOLA method to solve NS equations without considering free surface. it suppose to be a simply coding work. But I cannot get the pressure right.

After the first step calculating a tentative veloctiy field, the pressure corrections by applying the tentative veloctiy field in continuity equation are applied. the equation i used is delp(p)= - D(ijk)/[∂D/∂p] . and then, use delp(p) to correct the velocity field until they are converged.

Is there any trick for this classic method? since there is no free surface, the calculation should be quite straight forward. the BCs i used are no-slip for velocity, and sysmetry for pressure. Any suggestion to improve the code?
  Reply With Quote

Old   November 5, 2007, 12:24
Default Re: Pressure&Veloctiy Iteration in SOLA method
  #2
rt
Guest
 
Posts: n/a
plz give more details what you mean about wrong pressure,

note that you should define a ref. pressure in one position and then talk about pressure.

I already have used sola in cavity benchmark and i was well (althouth it was very slow to converge in high renolds, e.g. 1000)
  Reply With Quote

Old   November 5, 2007, 15:37
Default Re: Pressure&Veloctiy Iteration in SOLA method
  #3
otd
Guest
 
Posts: n/a
There are a couple of things you can do to speed things up. First, experiment some with alpha, the relaxation factor.

Second, the LANL folks who developed SOLA-surf learned long ago that there's no benefit with converging the pressure iteration beyond some minimum value - it just burns up more iterations. The rule of thumb is given in a publication that I can't find just now. If you need to document it, look at publications of C. W. Hirt in the 1980-85 time frame. The formula is

'optimum' epsilon (convergence criteria defined in the documentation) is about

= 2.0e-4 * V / D.

V is a 'typical velocity'

D is the minimum mesh dimension.

Again, you'll need to do some experimentation.

If you have a free surface, the code automatically sets the fluid pressure relative to the specified surface pressure.

With no free surface, the changes in pressure determined by the iteration procedure are designed to satisfy continuity in every cell. To start the calculation, specify an initial pressure field, then allow that to be corrected in such a way that continuity is satisfied from time step to time step. Fixing the pressure in one cell destroys mass conservation in that cell - and slows down the convergence process.

  Reply With Quote

Old   November 6, 2007, 00:16
Default Re: Pressure&Veloctiy Iteration in SOLA method
  #4
rt
Guest
 
Posts: n/a
> Fixing the pressure in one cell destroys mass conservation in that cell - and slows down the convergence process.

It is not required to fix pressure during pressure relaxation, but it is sufficint to compute ur desirable pressure by post processing pressure, e.g., P_new = P_calc + P_ref.

I suggest this issue to "Lang Yuan" because novice peoples usually has difficulty to interpret pressure, e.g. negative pressure is strang for them and they think that it is due to computation error.

  Reply With Quote

Old   November 6, 2007, 07:41
Default Re: Pressure&Veloctiy Iteration in SOLA method
  #5
LY
Guest
 
Posts: n/a
Thanks for your reply.

Take a simplest example to explain how i used. [constant veloctiy goes through a steight tube] . i set that initial conditons for pressure are all air pressure and set the inlet pressure to Air pressure as well and with constant velocity. outlet conditions are only set the same velocity with the inlet. Boundary condtion for pressure i used is symmetric, for velocity is no-slip. during each iteration of pressure and velocity corretion, I applied the BCs in the calculation. the reuslts showed the velocity field is reasonable, but the pressure value decreased significantly(range -1e4 to 1e5), which is not right.

I tried the classic lid driven cavity flow. the whole process cannot be converged. (different relaxation factors and alpha are tried).

I double checked the iteration process of pressure and velocity correction. they are totally fit with the original method. So i get confused with the problem. Actually, I used SOLA-VOF for a free surface problem before, it works well.

Thanks very much, waiting for your comments.

LY
  Reply With Quote

Old   November 6, 2007, 07:50
Default Re: Pressure&Veloctiy Iteration in SOLA method
  #6
LY
Guest
 
Posts: n/a
Thanks very much for both your comments.

I will try to read the paper and find more.

Here For classic lid driven cavity flow problem, how do you set the initial condtions and boundary condtions for this problem? if you define three differnet types of cells: Wall, inlet and fluid.

Cheers, LY
  Reply With Quote

Old   November 6, 2007, 09:51
Default Re: Pressure&Veloctiy Iteration in SOLA method
  #7
otd
Guest
 
Posts: n/a
Don't know what an 'inlet' bc is for a driven cavity. The fluid is sealed in the cavity so there's no inlet or outlet. That is, the velocity across the boundary is zero.

The standard no-slip boundary (on the velocities parallel to the walls) is v-tangent = 0. The condition is applied by setting the tangential velocity in the 'image' or 'ghost' cell. This is set by

v-ghost = - v-interior.

It's straightforward to extend this to v-tangent = specified-wall-velocity, which drives the circulating flow in the cavity. Use something like

v-ghost = 2*v-tangent - v-interior

Be careful with this because it assumes a uniform mesh spacing at and near the wall.
  Reply With Quote

Old   November 6, 2007, 10:25
Default Re: Pressure&Veloctiy Iteration in SOLA method
  #8
LY
Guest
 
Posts: n/a
thanks! Otd.

what's the pressure boundary conditons used in this case?

here inlet just means the moving lid which drives the flow. It should be correctted in this case as you said.

  Reply With Quote

Old   November 6, 2007, 11:46
Default Re: Pressure&Veloctiy Iteration in SOLA method
  #9
rt
Guest
 
Posts: n/a
at first a general comment:

you should first validate your code againts either exact solution or available benchmark. My suggestion: at first step lid deriven cavity is the best one, because it is very simple, particularly we do not have inlet/outlet conditions which are more problematic. Then i suggest to test flow in a channel with velosity inlet bc (not pressure).

Regarding to lid driven cavity: pressure bc is homogeneousw newmann, i.e., grad P . n = 0 across all walls. in uniform grid FDM language is P_in = P_gost.

Note that sola has difficulty to resolve corner vortexes when Renold is high, basically cell by cell pressure correction is not good method and works when pressure gradient is low, note that sola is almost exterminated nowadays, i stronly recommend to switch to projection method. also if you follow Los Alamos progress you see that they switch to projection method (ICCG solver) in NASAVOF code and betterly in Ripple code (if you need code in this context i could guide you, my personal code has this issue plus MAC plus PLIC VOF for interface resolution, i could share it with you), i do not think you can figure out Re=10000 results with formal sola algorithm.

> how do you set the initial condtions and boundary

is not important, i have used zero field condition.

Bc is noslip in all walls except u velosity of lid.

Finally i should say that in Sola algorithm a spesified pressure BC is a serious problem and is one of difficulty of thyis method.

  Reply With Quote

Old   November 6, 2007, 12:21
Default Re: Pressure&Veloctiy Iteration in SOLA method
  #10
LY
Guest
 
Posts: n/a
Thank you so much! rt!

i am trying to solve the lid moving case with Sola code first to test the code anyway. From your text, It is better for me to switch to another method. I am also thinking about it. I always foucs on SOLA and SIMPLE, know very little about other methods. Could you recommend some key papers?

I suppose I will have lots of questions on these kinds of problems, could you please tell me your email or send me an email? so that i can contact with you easily.

  Reply With Quote

Old   November 6, 2007, 16:12
Default Re: Pressure&Veloctiy Iteration in SOLA method
  #11
rt
Guest
 
Posts: n/a
note that simple is not a good choice for unsteady cases (computationally expensive)

> Could you recommend some key papers?

if you look for a book this one give you a good insight about projection method:

M Griebel, T Dornseifer, T Neunhoeffer, Numerical simulation in fluid dynamics, 1998.

Another good Ref. is Ripple manual it is online available, if u need it and do ont find it, give ur mail ID i will forward to u a copy, i do not remember it link.

  Reply With Quote

Old   November 6, 2007, 16:44
Default Re: Pressure&Veloctiy Iteration in SOLA method
  #12
LY
Guest
 
Posts: n/a
Great, thanks. my email is: l.yuan@hotmail.co.uk

thanks again!
  Reply With Quote

Old   January 2, 2010, 07:40
Default
  #13
New Member
 
Cheng Zhang
Join Date: Oct 2009
Posts: 11
Rep Power: 16
alongalong2 is on a distinguished road
Quote:
Originally Posted by rt
;52634
note that simple is not a good choice for unsteady cases (computationally expensive)

> Could you recommend some key papers?

if you look for a book this one give you a good insight about projection method:

M Griebel, T Dornseifer, T Neunhoeffer, Numerical simulation in fluid dynamics, 1998.

Another good Ref. is Ripple manual it is online available, if u need it and do ont find it, give ur mail ID i will forward to u a copy, i do not remember it link.
Hello rt, I want to find RIPPLE CODE too, so can you help me too?
You can connect to me with e-mail:alongalong2@hotmail.com
Thanks very much.
alongalong2 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Newtons Method failed to converge in 100 iteration hagupta CFX 9 December 2, 2010 07:41
Parallel runs slower with MTU=9000 than MTU=1500 Javier Larrondo FLUENT 0 October 28, 2007 23:30
where can get code about SOLA method yujun Main CFD Forum 1 April 29, 2004 10:46
Heat exchanger problem chiseung FLUENT 16 October 20, 2001 05:36
Do you have idea over SOLA method? Srinivasulu Main CFD Forum 9 November 3, 2000 18:04


All times are GMT -4. The time now is 20:48.