ICEM Tetra
Hi all,
I have a question concerning ICEM Tetra. Is it possible to mesh a volume with an inserted baffle? If so, could you please tell me how this can be done? thx |
Re: ICEM Tetra
ICEM Tetra automatically creates triangular shells on all surfaces, so if only your geometry model contains internal surfaces, you should get the baffles automatically in your mesh.
|
Re: ICEM Tetra
No this is not the case. I have a room with a baffle inside and when I have a look at the mesh no triangles are created for the interior surface (zero thickness). I guess tetra can't do it, because nothing is mention in the manual about zero thickness surfaces in volumes.
|
Re: ICEM Tetra
You have to enable "internal wall" in Geometry->Mesh Params->Select Family. If neccessary you can split the evolving shell elements into two (if you have to distinguish left and right side) in the mesh editor
|
Re: ICEM Tetra
Thank you for your help
|
All times are GMT -4. The time now is 02:19. |