|
[Sponsors] |
March 11, 2010, 06:51 |
help Linkin faces for a 3d grid
|
#1 |
New Member
Rob
Join Date: Mar 2010
Posts: 1
Rep Power: 0 |
Im trying to make a 3d grid in gambit. if basicly got a block with another block within it. i have hopefuly attached an image of the model. i need to link the oposit faces of the larger block to make periodic boundries. I can link the two faces that dont have the smaller block attached to them but i can link the two faces that are connected by the smaller back (highlighted in red on the image). It says "there must be one edge specific for each face loop". iv tried selecting varius combinations of vertexes but with no luck.
sugestions would be much apretiated. thankyou |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 08:54 |
DecomposePar unequal number of shared faces | maka | OpenFOAM Pre-Processing | 6 | August 12, 2010 09:01 |
[snappyHexMesh] external flow with snappyHexMesh | chelvistero | OpenFOAM Meshing & Mesh Conversion | 11 | January 15, 2010 19:43 |
Unaligned accesses on IA64 | andre | OpenFOAM | 5 | June 23, 2008 10:37 |
Combustion Convergence problems | Art Stretton | Phoenics | 5 | April 2, 2002 05:59 |