Duct air flow modeling

Dan SW FL · March 21, 2010, 15:27

PRACTICAL APPLICATION INQUIRY

Is it relatively easy to establish a mesh of two intersecting ducts (LARGE ALUMINUM Tubes, if you will) ?

Who performs CFD analysis for air flow in a duct as a regular part of their work?

I have an unique application with a duct within a duct and 90 degree, mitered elbows.

The usual way to determine network flow is to establish the flow resistance characteristic ( K value ) for each component.

sanketpathak · July 6, 2010, 02:07

Hello Mr. Racine,

We are the experts in carrying out CFD Analysis of Duct, ESP, Boiler etc.
If you have any enquiry you can give a mail to mechwellsanket@gmail.com.

jbritton · July 6, 2010, 04:57

This is a pretty basic analysis to be carried out from the sounds of it, meshing wouldn't take too long, Im sure if you post more details people here will be able to recommend some tutorials or literature to get you through the problem.

March 21, 2010, 15:27	Duct air flow modeling	#1
Dan SW FL New Member Dan Racine Join Date: Mar 2010 Location: Florida Posts: 1 Rep Power: 0	PRACTICAL APPLICATION INQUIRY Is it relatively easy to establish a mesh of two intersecting ducts (LARGE ALUMINUM Tubes, if you will) ? Who performs CFD analysis for air flow in a duct as a regular part of their work? I have an unique application with a duct within a duct and 90 degree, mitered elbows. The usual way to determine network flow is to establish the flow resistance characteristic ( K value ) for each component.

July 6, 2010, 02:07	Re: Duct air flow modeling	#2
sanketpathak New Member Sanket Join Date: Jul 2010 Posts: 4 Rep Power: 15	Hello Mr. Racine, We are the experts in carrying out CFD Analysis of Duct, ESP, Boiler etc. If you have any enquiry you can give a mail to mechwellsanket@gmail.com.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Modeling reduced flow rate in 2D	Tom Smith	FLUENT	2	April 27, 2007 09:04
laminar viscous flow in a rectangular duct	Bastian	FLUENT	0	July 2, 2004 08:51
Question about flow in ducted fan in another duct	Jane	FLUENT	0	June 21, 2004 13:57
CFD Modeling of Two-phase Flow in Small Dia.Tubes	Eric Poindexter	Main CFD Forum	2	September 22, 2000 09:21
fluid flow fundas	ram	Main CFD Forum	5	June 17, 2000 21:31

July 6, 2010, 04:57		#3
jbritton Member james britton Join Date: Jan 2010 Posts: 38 Rep Power: 16	This is a pretty basic analysis to be carried out from the sounds of it, meshing wouldn't take too long, Im sure if you post more details people here will be able to recommend some tutorials or literature to get you through the problem.