CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   Modelling roughness with a laminar flow in Fluent (http://www.cfd-online.com/Forums/main/75124-modelling-roughness-laminar-flow-fluent.html)

1000sh April 16, 2010 14:41

Modelling roughness with a laminar flow in Fluent
 
Hi all I was just wondering if its possible to model roughness with a laminar flow. I have managed to model roughness with a turbulent flow by using the k-epsilon model and setting the near wall treatment as standard wall functions. This has meant that I could define the roughness in the wall boundary conditions.

I was wondering if you could do the same with a laminar flow? If i select the laminar model I cannot define the momentum wall boundary conditions. Can I use the k-epsilon model and have a laminar reynolds number? will it yield the correct results or would they be wrong?

thank you!


All times are GMT -4. The time now is 05:08.