# dimensional splitting

 User Name Remember Me Password
 Register Blogs Members List Search Today's Posts Mark Forums Read

 June 2, 2004, 14:44 dimensional splitting #1 Alfasi Guest   Posts: n/a hi every body who can guide me to some online resources or any kind of help dealing with dimensional splitting method to solve multidimensional problems. thanks in advance alfasi

 June 3, 2004, 05:46 Re: dimensional splitting #2 Li Yang Guest   Posts: n/a The NS equations have to be transformed in a general form. For a finite volume method, what you need is the residual in each finite volume which can be obtained by summing up all the fluxes on all the surfaces of the finite volume. When you calculate the flux on one of the surfaces, only the normal direction counts as the other two directions are perpendicaular to the normal direction and hence have no contributions to the flux on this surface. However, this flux in the normal direction will have to be obtained by summing up the contributions from three directions x,y,z via a coordinate transformation. I remember that the book by Hoffman has a good description on the equation transformation: Computational Fluid Dynamics Vol 1,2 by Klaus A. Hoffmann Li Yang

 June 3, 2004, 13:44 Re: dimensional splitting #3 Alfasi Guest   Posts: n/a thanks

 Thread Tools Display Modes Linear Mode

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is OffTrackbacks are On Pingbacks are On Refbacks are On Forum Rules

 Similar Threads Thread Thread Starter Forum Replies Last Post emrah Main CFD Forum 3 August 30, 2014 08:53 Dr B.M. Smith (Smith) OpenFOAM Running, Solving & CFD 19 January 9, 2013 05:07 Asghari_M ANSYS Meshing & Geometry 0 June 7, 2011 05:28 George Kagadis FLUENT 0 September 30, 2004 01:35 J.J Main CFD Forum 1 June 28, 2000 20:12

All times are GMT -4. The time now is 14:03.

 Contact Us - CFD Online - Top