Body forces on hovering airfoil

sanmysterio · July 12, 2010, 12:17

hii am solving a dynamic mesh case in which my flow is stationary and airfoil is performing hovering motion now i have given inlet velocity as 0 since flow is stationary but i want to calculate body forces due to motion of airfoil in fluid.
please kindly suggest what should be done in order to calculate lift and drag on body
thank you

hectorgabriel85 · July 13, 2010, 03:14

Hi
I've never modelled a hovering airfoil, let's see if my comments make sense for you.
Probably you need to perform transient analysis. I was thinking to do a steady state analysis for simplicity but I cannot find any way of doing it.
Then you need to assign a predefined velocity to the wing according to the hovering trajectory you want. Probably all the points will have the same velocity at a given time if we consider the airfoil totally rigid. If the airfoil deforms substantially, you may need fluid-structure interaction.
Hope it makes sense.

July 12, 2010, 12:17	Body forces on hovering airfoil	#1
sanmysterio New Member sandip chajjed Join Date: Mar 2010 Posts: 3 Rep Power: 16	hii am solving a dynamic mesh case in which my flow is stationary and airfoil is performing hovering motion now i have given inlet velocity as 0 since flow is stationary but i want to calculate body forces due to motion of airfoil in fluid. please kindly suggest what should be done in order to calculate lift and drag on body thank you

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
incorrect forces for symmetric airfoil	nomad	OpenFOAM	13	September 15, 2009 11:15
Fan modelling using body forces :specification	Fred	Siemens	1	May 4, 2007 07:40
strong body forces	Ankan	Main CFD Forum	0	August 2, 2005 02:13
Effect of body forces	Shiju G.Thomas	FLUENT	1	February 19, 2005 06:58
Body Forces	Thomas P. Abraham	Main CFD Forum	1	April 21, 1999 21:24

July 13, 2010, 03:14		#2
hectorgabriel85 Member Hector Join Date: Jul 2010 Location: Barcelona Posts: 30 Rep Power: 15	Hi I've never modelled a hovering airfoil, let's see if my comments make sense for you. Probably you need to perform transient analysis. I was thinking to do a steady state analysis for simplicity but I cannot find any way of doing it. Then you need to assign a predefined velocity to the wing according to the hovering trajectory you want. Probably all the points will have the same velocity at a given time if we consider the airfoil totally rigid. If the airfoil deforms substantially, you may need fluid-structure interaction. Hope it makes sense.