CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Slow flow

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 25, 2004, 07:38
Default Slow flow
  #1
Francisco
Guest
 
Posts: n/a
What is a good approximation for very very slow flow, a few mm per hour, in a transient stage? Low velocity in a fluid with density similar to that of water. Does any body know about publications on the subject?
  Reply With Quote

Old   July 25, 2004, 08:44
Default Re: Slow flow
  #2
Rami
Guest
 
Posts: n/a
Is your Re small? If so, this is Stokes (or creeping) flow, where the convection term is negligible compared to diffusion. In this case the solution is much easier - since convection usually causes most of the modeling difficulties - and the equations become similar in form to the heat conduction equation. I am not sure what is the common threshold for the applicability of this simplification, though - I think it is Re<1, but you should check it for yourself.
  Reply With Quote

Old   July 26, 2004, 17:57
Default Re: Slow flow
  #3
Francisco
Guest
 
Posts: n/a
Rami. Thank you. Do you know any publication showing classical cases?
  Reply With Quote

Old   July 29, 2004, 18:54
Default Re: Slow flow
  #4
jenn
Guest
 
Posts: n/a
Use google and type "stokes flow", you will find tons of them and it is always discussed in traditional fluid mechanics books.
  Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
benchmark: flow over a circular cylinder goodegg Main CFD Forum 12 January 22, 2013 11:47
reversed flow at velocity inlet / mass flow inlet ib FLUENT 1 March 26, 2007 13:11
How to change from mass flow to volume flow rate stanley FLUENT 1 February 2, 2007 06:44
transform navier-stokes eq. to euler-eq. pxyz Main CFD Forum 37 July 7, 2006 08:42
Instability and Vortex/roll structure Z. Zeng Main CFD Forum 3 May 10, 2000 05:18


All times are GMT -4. The time now is 16:39.