CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

Basic Comsol CAD Problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 27, 2010, 14:58
Default Basic Comsol CAD Problem
  #1
New Member
 
Mark
Join Date: Aug 2010
Posts: 1
Rep Power: 0
Sapo is on a distinguished road
I have gone through the tutorial and manual, but I still can't figure out how to cut out shapes. For example, if I make a tank and a pipe going into the tank, how do I cut out the section of the tank where the pipe goes in?
Sapo is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Handling cyclic BC from gambit to openfoam for a cascade airfoil problem - OF 1.6 maverick OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 June 18, 2011 04:36
Velocity profiles problem behind the elbow (3D problem) kabat73 FLUENT 8 May 9, 2010 04:26
comsol cantilever beam problem bhu47 Main CFD Forum 0 June 30, 2008 14:59
convergence problem in comsol anderson Main CFD Forum 0 February 24, 2008 17:54
Solver Selection with COMSOL S. Gatzka Main CFD Forum 1 January 27, 2008 17:35


All times are GMT -4. The time now is 03:15.