CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Supersonic Flame

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 18, 2004, 11:15
Default Supersonic Flame
  #1
Doctor Blade
Guest
 
Posts: n/a
I need your opinion about the next problem:

There is a fuel injector that feeds a coaxial free downstream of air, in the stream direction. I'm going to use Euler equations (without viscous terms and heat conduction, but with reactive terms) in addition to species conservation (without diffusion terms). Both streams, fuel and air, flows supersonically. When they meet at the injector outflow, I hope that reaction will take place. I'm want to use MacCormack's.

But, what am I going to see?. Would it be possible that a diffusion flame (although it does not really exists) was formed?. Any suggestions?

Thanks in advance
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Probelm with supersonic exhaust to ambient newj CFX 2 August 9, 2012 19:01
Modeling the Sandia flame D with EDC Christoph_84 FLUENT 1 September 18, 2011 21:24
Enquiry about the flame simulation in rotary kiln hassanelattar FLUENT 0 March 25, 2009 08:41
premixed flame modeling problem peiyong wang CFX 1 July 18, 2008 13:02
Flame stabilization(DNS) Sakis Gkatzoulis Main CFD Forum 0 September 1, 2005 07:39


All times are GMT -4. The time now is 18:15.