CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   CFD of 3D Wing Tip Blowing (http://www.cfd-online.com/Forums/main/81847-cfd-3d-wing-tip-blowing.html)

NLao November 8, 2010 19:46

CFD of 3D Wing Tip Blowing
 
Hi All,

I am trying to simulate a naca0012 3d wing, 10 degs AoA, with continuous jet streams coming out from the tips, so I can see the effects these jets have on blowing out the wing tip vortices and reducing downwash.

I am just trying to get my head around how to tackle this. What I am trying at the moment is, creating the geometry of the wing and wing tip in solidworks, then importing it into Gambit as a IGES file, meshing it, and then finally put into ANSYS 12.1 (Fluent) to analyse.

Are there any suggestions on how to approach this problem? :confused:

Thanks

P.s. I am completely new to CFD and all packages.

cfd seeker March 1, 2012 02:44

its been long when this topic was posted but i am interested to know that have you managed to complete this project, now a days i am also involved in the similar type of project


All times are GMT -4. The time now is 22:34.