How to calculate Y+( Yplus)

mohammad · January 7, 2011, 09:47

Hi everybody.
I'm working on a wind turbine.
I want to set the first node position ( yplsu) for teh blade.my question is that how should I calculate Yplus?
I have found the formula
DY=L*(DY+)*SQRT(80)*Re^(-13/14)
as a rule of thumb to calculate Yplus.

But, as soon as I get the results and I see the value of Yplus in the CFX_postresult, those values really differ from what I set in ICEM.

Do you still think the above equation for calculation of (DY+) is trustworthy and enough? If the resulted Yplus' are severely different form the given Yplus, Should I go back to ICEM file and rearrange my mesh or just when the above equation is satisfied it's enough?

TNX

aamer · January 7, 2011, 13:41

Hello Mohammad...

type "viscous grid spacing calculator" on google and you will find an interface which calculates y pluss for you based on certain inputs. please check if it helps.

mahbub03 · January 8, 2011, 11:55

Try this link.

http://geolab.larc.nasa.gov/APPS/YPlus/

mohammad · January 11, 2011, 23:23

Hi...
Thank you guys for your help...
Results of that link are the almost the same as the proposed equation in Ansys Help Manual...
For future readers, I must say that according to my experience, the equation is good but It's necessary that after applying this equation and calculating the YPLUS you must check the value of YPLUS in CFX-POSTP_ROCESS and check whether you need more changes or not...I mean as an essential and extra check check CFX-POSTP_ROCESS.

Best wishes

January 7, 2011, 09:47	How to calculate Y+( Yplus)	#1
mohammad Senior Member mohammad Join Date: Dec 2010 Location: UK Posts: 245 Rep Power: 16	Hi everybody. I'm working on a wind turbine. I want to set the first node position ( yplsu) for teh blade.my question is that how should I calculate Yplus? I have found the formula DY=L(DY+)SQRT(80)*Re^(-13/14) as a rule of thumb to calculate Yplus. But, as soon as I get the results and I see the value of Yplus in the CFX_postresult, those values really differ from what I set in ICEM. Do you still think the above equation for calculation of (DY+) is trustworthy and enough? If the resulted Yplus' are severely different form the given Yplus, Should I go back to ICEM file and rearrange my mesh or just when the above equation is satisfied it's enough? TNX

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
which yplus (SST)	sanchezz	CFX	17	January 11, 2010 04:45
YPlus values	underGroundMan	CFX	2	July 24, 2008 10:51
Who stole my Yplus?	Chebeba	CFX	4	March 23, 2006 04:18
X-Y plot of Yplus in Fluent 5.3	Luo	FLUENT	24	April 11, 2000 06:07
heat transfer coefficients with "bad" yplus	Andrew	Main CFD Forum	4	April 8, 1999 04:43

January 7, 2011, 13:41		#2
aamer Member Aamer Shahzad Join Date: Mar 2010 Posts: 58 Rep Power: 16	Hello Mohammad... type "viscous grid spacing calculator" on google and you will find an interface which calculates y pluss for you based on certain inputs. please check if it helps.

January 8, 2011, 11:55		#3
mahbub03 New Member Mahbub Islam Join Date: Mar 2010 Location: Bangladesh Posts: 24 Rep Power: 16	Try this link. http://geolab.larc.nasa.gov/APPS/YPlus/

January 11, 2011, 23:23		#4
mohammad Senior Member mohammad Join Date: Dec 2010 Location: UK Posts: 245 Rep Power: 16	Hi... Thank you guys for your help... Results of that link are the almost the same as the proposed equation in Ansys Help Manual... For future readers, I must say that according to my experience, the equation is good but It's necessary that after applying this equation and calculating the YPLUS you must check the value of YPLUS in CFX-POSTP_ROCESS and check whether you need more changes or not...I mean as an essential and extra check check CFX-POSTP_ROCESS. Best wishes