CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   NASA Rotor Geometry (http://www.cfd-online.com/Forums/main/84592-nasa-rotor-geometry.html)

ddutt February 3, 2011 06:33

NASA Rotor Geometry
 
Hi

I need to design a rotor with the specificatios as shown (url also attached)
http://flickr.com/gp/devraj_dutt/82e50i
http://flickr.com/gp/devraj_dutt/82e50i

This is typical specification found on the NASA Technical Report Server.

A key to the symbols used is attached below (2 urls)

http://flickr.com/gp/devraj_dutt/F1b1Jv
http://flickr.com/gp/devraj_dutt/F1b1Jv
http://flickr.com/gp/devraj_dutt/hpD19d
http://flickr.com/gp/devraj_dutt/hpD19d

I wonder if anybody knows about a program in which sych data can be input/ method by which this can be modelled.

I have ANSYS CFX (with BladeGen) but I cannot use it well. For now, I only know how to use Gambit, FLUENT and other modeling software (CATIA, Unigraphics and Pro E)

Thanks


All times are GMT -4. The time now is 13:56.