CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

PREMIX code - usage?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 16, 2004, 10:31
Default PREMIX code - usage?
  #1
Comb
Guest
 
Posts: n/a
Dear CFD/combustion colleagues,

I'm trying to use PREMIX code from CHEMKIN II package in a freely propagating flame configuration + hydrogen chemistry.

Question: How one sets appropriatelly the initial guesses for the product and intermediate species composition? The same with the temperature profile? Does one has to specify intermediate species at all or program handles such situations alone, without user supplied input?

So, if someone of you uses PREMIX code, please give some short hints on upper questions. Thak you!
  Reply With Quote

Old   December 19, 2004, 10:29
Default Re: PREMIX code - usage?
  #2
versi
Guest
 
Posts: n/a
When computing chemically reacting flow, if the chemical reaction scheme can spontaneously produce all species, then you need not to prescrible the intermediate speices. However, in some cases, you need to specify intermediate species when there are no reaction chanels to a species. Specify a very small number of it, say, mass fraction of 10^_{-11}.
  Reply With Quote

Old   December 19, 2004, 12:41
Default Re: PREMIX code - usage?
  #3
Comb
Guest
 
Posts: n/a
I tried it that way in meantime, and it seems to work - just as you said! Thanks for info, anyway.

Regards
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
The FOAM Documentation Project - SHUT-DOWN holger_marschall OpenFOAM 242 March 7, 2013 13:30
Debugging Unsteady 2-D Panel Method Code: Wake Modeling RajeshAero Main CFD Forum 5 November 10, 2011 06:48
How to make code run in parallel? cwang5 OpenFOAM Programming & Development 1 May 30, 2011 04:47
Open Source Vs Commercial Software MechE OpenFOAM 28 May 16, 2011 11:02
Small 3-D code Zdravko Stojanovic Main CFD Forum 2 July 19, 2010 10:11


All times are GMT -4. The time now is 04:45.