CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   bellmouth flow analysis (http://www.cfd-online.com/Forums/main/84688-bellmouth-flow-analysis.html)

munna1981 February 6, 2011 09:44

bellmouth flow analysis
 
Hellow everybody
This is PNVR Murthy..i want a small help from u people...iam doing my final year project on engine bellmouth flow analysis..
Can anyone please explain me how to do flow analysis for Bellmouth of Gas turbine engine test bed . I have the profile of the bellmouth.
How the modelling should be done?

My doubt is whether we can do analysis of bellmouth alone or i have to keep bellmouth with engine model in test cell and then i have to analysis.and what Boundary conditions should be given?.
if u have any example bellmouth analysis ...please help me sir..
itsmerhythm@yahoo.com

RobertB February 8, 2011 15:47

You should include the geometry upstream of the bellmouth.

I would suggest a massflow inlet and pressure outlet. The pressure value at the compressor entry is typically in the 85-90K Pa absolute.

munna1981 February 11, 2011 22:46

Bellmouth flow analysis
 
Thank you very vert much sir.
Where do I get tutorial on Bellmouth flow analysis?
or example problem? Any Document related Bellmouth flow analysis?

Far February 14, 2011 13:04

send your email id i shall send you paper on this


All times are GMT -4. The time now is 11:11.