|
[Sponsors] | |||||
|
|
|
#1 |
|
Guest
Posts: n/a
|
Hello, I would like to ask about some reference for FVM in cylindrical coordinate. All of this is in 3D. Thanks,
|
|
|
||
|
|
|
#2 |
|
Guest
Posts: n/a
|
Hi,
You can goto, IIT Bombay library site - www.library.iitb.ac.in . Ask for softcopy my M.Tech thesis "Euler Analysis of Unsteady Flows in Axial Flow Turbomachine. Look at the refernce section you will find many paper on it. The implmentation is quite simple. Have a look at the turbomachinery paper by "W.N. Dawes" and "J.D. Denton", Journal of Turbomachinery, April 1992, p.11 and p.1 respectively. Good Luck A.S. |
|
|
||
|
|
|
#3 |
|
Guest
Posts: n/a
|
www.dur.ac.uk/haidong.li/PDF/IMechE_2001.PDF www.grc.nasa.gov/WWW/5810/rvc/docs/ssme.pdf
Have a look at above Papers to. Good Luck A.S. |
|
|
||
|
|
|
#4 |
|
Guest
Posts: n/a
|
thank you , I will looking for those paper
|
|
|
||
![]() |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Second Derivative Zero - Boundary Condition | fu-ki-pa | OpenFOAM | 8 | July 3, 2011 20:58 |
| Error with Wmake | skabilan | OpenFOAM Installation | 3 | July 28, 2009 00:35 |
| OpenFOAM on MinGW crosscompiler hosted on Linux | allenzhao | OpenFOAM Installation | 127 | January 30, 2009 19:08 |
| G95 + CGNS | Bruno | Main CFD Forum | 1 | January 30, 2007 00:34 |
| Building OpenFoAm on SGI Altix 64bits | anne | OpenFOAM Installation | 8 | June 15, 2006 09:27 |