CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

Aerospace Master Course

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 12, 2011, 13:38
Default Aerospace Master Course
  #1
New Member
 
Join Date: Mar 2011
Posts: 2
Rep Power: 0
SK46 is on a distinguished road
Hello!
This is my first post here, so nice to meet you all!
I have recently acquired my mech. engineering degree, and I am interested in pursuing an aerospace master course focused on aerodynamics (both experimental and numerical).
I have applied in KTH, TU Delft and Von Karman Institute.
My first choice is VKI, however If my application is rejected I will have to choose one of the other two.
I know that they are both highly ranked universities and so I am not concerned about the level of studies. What I would like to know is which one would you recommend based on the following criteria.
Which country according to your opinion (Sweden or Holland) would offer more job openings for a future engineer in this sector? Furthermore, on an international level, do you believe that recruiters would value differently graduates of the former 2 universities?
Thank you very much for your time.
SK46 is offline   Reply With Quote

Old   March 13, 2011, 00:00
Default
  #2
Senior Member
 
Raashid Baig
Join Date: Mar 2010
Location: Bangalore, India
Posts: 136
Rep Power: 7
cfd_newbie is on a distinguished road
Quote:
Originally Posted by SK46 View Post
Hello!
This is my first post here, so nice to meet you all!
I have recently acquired my mech. engineering degree, and I am interested in pursuing an aerospace master course focused on aerodynamics (both experimental and numerical).
I have applied in KTH, TU Delft and Von Karman Institute.
My first choice is VKI, however If my application is rejected I will have to choose one of the other two.
I know that they are both highly ranked universities and so I am not concerned about the level of studies. What I would like to know is which one would you recommend based on the following criteria.
Which country according to your opinion (Sweden or Holland) would offer more job openings for a future engineer in this sector? Furthermore, on an international level, do you believe that recruiters would value differently graduates of the former 2 universities?
Thank you very much for your time.
Hi SK46,
I am replying as a fellow human being. Don't take so much tension. Pray to god that you get a good environment to learn and understand. All the universities you mentioned are good. All you have to concentrate on building fundamentals and once you get a degree you can get a nice job anywhere in the world. At this stage you should just try to relax and work hard on your basics, other things will come on their own to you.
cfd_newbie is offline   Reply With Quote

Old   March 14, 2011, 04:01
Default
  #3
New Member
 
Join Date: Mar 2011
Posts: 2
Rep Power: 0
SK46 is on a distinguished road
Thank you for your answer.
I was asking because for me this will be a major investment and will cost me a lot financially.
But you are probably right, one cannot predict the future
SK46 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
stop when I run in parallel Nolwenn OpenFOAM 34 September 24, 2011 14:51
openfoam 1.6 on debian etch romant OpenFOAM Installation 9 May 6, 2010 02:26
BlockMeshmergePatchPairs hjasak OpenFOAM Native Meshers: blockMesh 11 August 15, 2008 07:36
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15
Call for papers, ASME Aerospace fluent_support FLUENT 0 June 26, 2000 11:59


All times are GMT -4. The time now is 02:21.