Cooling fan design algorithm Program

Megatron · April 15, 2011, 07:15

Hi Guys,

I am trying to learn how to design a fan. I am going through various books on fan design but no book is giving any procedure to design a fan.

I also heard there are custom programs which can be used to create fan blades and then fan to be created. Could any of you help me by leading me to the right direction.

I don't want to roam around aimlessly around the CFD jungle looking for trouble.....

Megatron.

JBeilke · April 15, 2011, 08:14

Some time ago I did an fan blade optimisation using the following tools:

pdesk for parametric blade design with a direct export to GridPro for automatic hex meshing. StarCD for calculation and postprocessing and modeFrontier for the optimisation part.

The biggest challenge was to find a smart way for dealing with the many parameters in pdesk :-)

Megatron · April 15, 2011, 10:19

JBeilke,

That was very helpful.... I looked into pdesk but as you were saying it is way complicated for a beginner though. I thought of starting with hand calculation and then transfering it to design data!!!

May be that is not good idea!!! But I still need to know the basics rite....
Megatron

JBeilke · April 15, 2011, 15:56

You have to do 2 things at first :-)

1) doing some hand calculations and transfer them to a program like pdesk

2) setup a way to do cfd calculations

Hand calculations are fine to understand the topic and also to reduce the number of parameters during an optimisation. But at some point you have to create a "real" geometry and there you need something like pdesk (there also might be other similar programs).

You will find that going from 2d to 3d is not quit trivial.

April 15, 2011, 07:15	Cooling fan design algorithm Program	#1
Megatron New Member Join Date: Sep 2010 Posts: 22 Rep Power: 15	Hi Guys, I am trying to learn how to design a fan. I am going through various books on fan design but no book is giving any procedure to design a fan. I also heard there are custom programs which can be used to create fan blades and then fan to be created. Could any of you help me by leading me to the right direction. I don't want to roam around aimlessly around the CFD jungle looking for trouble..... Megatron.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
reg-Classical method of axial fan design	ramamoorthyramanan	Main CFD Forum	0	June 25, 2010 00:45
CFD algorithm design with reconfigurable computing	Beatríz Navarro	Main CFD Forum	1	June 25, 2006 14:25
CFD algorithm design with reconfigurable computing	Beatríz Navarro	FLUENT	0	June 24, 2006 18:22
Help: IC engine fan design	Sigan	Main CFD Forum	1	May 24, 2005 18:40
Info: Short Course On Thermal Design of Electronic Equipment	Arnold Free	Main CFD Forum	0	August 10, 1999 10:18

April 15, 2011, 08:14		#2
JBeilke Senior Member Joern Beilke Join Date: Mar 2009 Location: Dresden Posts: 498 Rep Power: 20	Some time ago I did an fan blade optimisation using the following tools: pdesk for parametric blade design with a direct export to GridPro for automatic hex meshing. StarCD for calculation and postprocessing and modeFrontier for the optimisation part. The biggest challenge was to find a smart way for dealing with the many parameters in pdesk :-)

April 15, 2011, 10:19		#3
Megatron New Member Join Date: Sep 2010 Posts: 22 Rep Power: 15	JBeilke, That was very helpful.... I looked into pdesk but as you were saying it is way complicated for a beginner though. I thought of starting with hand calculation and then transfering it to design data!!! May be that is not good idea!!! But I still need to know the basics rite.... Megatron

April 15, 2011, 15:56		#4
JBeilke Senior Member Joern Beilke Join Date: Mar 2009 Location: Dresden Posts: 498 Rep Power: 20	You have to do 2 things at first :-) 1) doing some hand calculations and transfer them to a program like pdesk 2) setup a way to do cfd calculations Hand calculations are fine to understand the topic and also to reduce the number of parameters during an optimisation. But at some point you have to create a "real" geometry and there you need something like pdesk (there also might be other similar programs). You will find that going from 2d to 3d is not quit trivial.