|
[Sponsors] |
February 9, 2005, 22:45 |
Could we begin a FOAM discussion group?
|
#1 |
Guest
Posts: n/a
|
In light of the recent OpenFOAM release, I would like to request the addition of a FOAM Discussion Group...
Kind consideration by the Baord Administrator would be very much appreciated. Regards, diaw... |
|
February 10, 2005, 03:06 |
Re: Could we begin a FOAM discussion group?
|
#2 |
Guest
Posts: n/a
|
There is already a discussion group in Foams site. Please have a look at that.
|
|
February 10, 2005, 03:40 |
Re: Could we begin a FOAM discussion group?
|
#3 |
Guest
Posts: n/a
|
There is already a FOAM discussion group run by Niklas Nordin at Chalmers. You can find it here:
http://tfdpc67.tfd.chalmers.se/foam/discus/index.html We'd be happy to also open a FOAM forum here at CFD Online, but only if the people behind FOAM want that. I'll ask Henry, Hrvoje and Niklas if they would like a FOAM forum at CFD Online. It would probably help to spread the word about FOAM in the CFD community. But I certainly understand if they prefer to have it on their own web-server. |
|
February 10, 2005, 06:52 |
Re: Could we begin a FOAM discussion group?
|
#4 |
Guest
Posts: n/a
|
Thanks for your consideration, Jonas.
I personally have always thought of <www.cfd-online.com> as THE place to visit when wanting to meet with the global CFD community, hence my request. Thanks again. Regards, diaw... |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 05:21 |
Constant velocity of the material | Sas | CFX | 15 | July 13, 2010 08:56 |
Are my IRIXbs systune parametersb setting correct | lakeat | OpenFOAM Installation | 1 | May 5, 2008 10:48 |
[blockMesh] Axisymmetrical mesh | Rasmus Gjesing (Gjesing) | OpenFOAM Meshing & Mesh Conversion | 10 | April 2, 2007 14:00 |
[Gmsh] Import gmsh msh to Foam | adorean | OpenFOAM Meshing & Mesh Conversion | 24 | April 27, 2005 08:19 |