CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Could we begin a FOAM discussion group?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 9, 2005, 23:45
Default Could we begin a FOAM discussion group?
  #1
diaw
Guest
 
Posts: n/a
In light of the recent OpenFOAM release, I would like to request the addition of a FOAM Discussion Group...

Kind consideration by the Baord Administrator would be very much appreciated.

Regards, diaw...
  Reply With Quote

Old   February 10, 2005, 04:06
Default Re: Could we begin a FOAM discussion group?
  #2
A.S.
Guest
 
Posts: n/a
There is already a discussion group in Foams site. Please have a look at that.
  Reply With Quote

Old   February 10, 2005, 04:40
Default Re: Could we begin a FOAM discussion group?
  #3
Jonas Larsson
Guest
 
Posts: n/a
There is already a FOAM discussion group run by Niklas Nordin at Chalmers. You can find it here:

http://tfdpc67.tfd.chalmers.se/foam/discus/index.html

We'd be happy to also open a FOAM forum here at CFD Online, but only if the people behind FOAM want that. I'll ask Henry, Hrvoje and Niklas if they would like a FOAM forum at CFD Online. It would probably help to spread the word about FOAM in the CFD community. But I certainly understand if they prefer to have it on their own web-server.
  Reply With Quote

Old   February 10, 2005, 07:52
Default Re: Could we begin a FOAM discussion group?
  #4
diaw
Guest
 
Posts: n/a
Thanks for your consideration, Jonas.

I personally have always thought of <www.cfd-online.com> as THE place to visit when wanting to meet with the global CFD community, hence my request.

Thanks again.

Regards, diaw...
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
Constant velocity of the material Sas CFX 15 July 13, 2010 09:56
Are my IRIXbs systune parametersb setting correct lakeat OpenFOAM Installation 1 May 5, 2008 11:48
[blockMesh] Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Meshing & Mesh Conversion 10 April 2, 2007 15:00
[Gmsh] Import gmsh msh to Foam adorean OpenFOAM Meshing & Mesh Conversion 24 April 27, 2005 09:19


All times are GMT -4. The time now is 11:31.