CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Main CFD Forum (http://www.cfd-online.com/Forums/main/)
-   -   CFD projects online (http://www.cfd-online.com/Forums/main/86904-cfd-projects-online.html)

Cfd_Engineer April 5, 2011 13:21

CFD projects online
 
I am professional CFD specialist. can anybody give some CFD projects ?

Lysistrata April 5, 2011 18:57

Quote:

Originally Posted by Cfd_Engineer (Post 302347)
I am professional CFD specialist. can anybody give some CFD projects ?

Thank you for your very kind offer to help the CFD community.

Here is an easy project for a CFD specialist that I would like to see.
Calculate the skin-friction on a flat plate for Reynolds numbers from 10^6 to 10^10. I look forward to seeing your results!

sail April 5, 2011 21:25

Quote:

Originally Posted by Lysistrata (Post 302389)
Thank you for your very kind offer to help the CFD community.

Here is an easy project for a CFD specialist that I would like to see.
Calculate the skin-friction on a flat plate for Reynolds numbers from 10^6 to 10^10. I look forward to seeing your results!

:D you are very doubting, as far as i can see...

Eezyville April 5, 2011 22:43

You could contribute to OpenFoam

spinner April 6, 2011 06:39

CFD project
 
Hi

I have an aircraft fuselage model that I want some analysis on, are you interested?

pritish April 6, 2011 14:31

Masters & PHD universities in Europe and America w.r.t. to some specific criterias.
 
Hello,

I am new to this CFD online.....I will get straight to my point..

First of all a brief Intro -

I have done my bachelors in Mechanical Engineering.
During my 6th semester..I started taking intrest in Aerodynamics...
I completed my bachelors in 2008....nd was into job within a month.
Worked in ANSA/Hypermesh/Nastran for NVH modelling and analysis for Powertrain Components(By the way I work for a major French Automobile Company in India).
After 2 and half years....I am into Powertrain CFD....for flow calculation..using StarCD Pro AMM..

I want to do Masters & PHD in Aerospace engineering(Because of the sole reason that I want to gain knowledge in Aerodynamics,Experimental CFD,Fluid Dynamics)....Basically i want to learn as much as I can on Aerodynamics...

I have short listed some of the U.S universities..based on -

1. Tution fees(coz of budget constraint)

2.Research areas and facilities available...as my primary objective is to learn Aerodynamics,Experimental CFD,Fluid Dynamics

3.Courses of studies and Elective available.

But still i have concers over my short listed Universities.

But I want to get some info. regarding any other Universities basically from Europe where I can pursue my masters and PHD based on my above mentioned 3 criterias of selection.

Please help me out with this..Thank You.:)


All times are GMT -4. The time now is 04:04.